Item
Trap Settings
Allow Setting
Trap Setting
When
Authentication
Fails
Apply button
Clear button
AppleTalk
Item
AppleTalk
Printer Name
Zone Name
Current Zone Name
Apply button
Clear button
Description
Specifies whether or not to permit the Trap settings
Choices: Allow, Restrict
Default: Allow
Specifies whether to enable or disable the Trap settings when authentication
failed.
Choices: Enable, Disable
Default: Disable
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
If Enable is selected, AppleTalk is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - APPLETALK - ENABLE
Sets the printer name.
Range: 1 to 31 characters
Default: AL-C3900-xxxxxx
Note:
xxxxxx displays six last digits of the MAC address in hexadecimals.
Sets the Zone Name.
Range: 1 to 31 characters
Default: *
Identifies the current zone name.
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
141