Epson AcuLaser C3900N Reference Manual page 109

Item
Tray Chaining
Apply button
Clear button
Tray Mapping Settings
Item
Tray Mapping Mode
Logical Tray 0-9
Apply button
Clear button
Description
Tray Chaining If Enable is selected and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the same
size is automatically selected so printing can continue.
If Disable is selected and the specified paper tray runs out of
paper, printing stops.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY CHAINING
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Select whether or not the Tray Mapping function is used.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY MAPPING - TRAY MAPPING MODE
Select the tray that is used for printing when a print job is received from another
manufacturer's printer driver.
The default setting for Logical Tray 1 is Physical Tray 1. The default setting for all
other trays is Physical Tray 2.
Choices: Physical Tray 1, Physical Tray 2, Physical Tray 3
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY MAPPING - LOGICAL TRAY0-9
Note:
Physical Tray 3 appears only if an optional 500-sheet paper cassette unit is
installed.
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
109