Epson AcuLaser C3900N Reference Manual page 125

Item
RAW Port
RAW Port Number
RAW Port Bidirectional
Apply button
Clear button
DNS Settings
For more information on these TCP/IP, see Chapter 4 "Network Printing " on page 49.
Item
Host Name
Domain Name
DNS Server(IPv4)
Description
Select whether or not RAW port is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - RAW PORT - ENABLE
Identifies the number of the printer's RAW port.
Choices: 1 - 65535
Default: 9100
Note:
The currently used port number and numbers 161, 443 and 631 cannot be specified.
Select whether or not the RAW Port bidirectional is used.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/IP - RAW PORT - BIDIRECTIONAL
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Specifies the host name.
Range: Up to 63 characters
Default: EPSON AL-C3900-xxxxxx
Note:
xxxxxx displays six last digits of the MAC address in hexadecimals.
Specifies the domain name.
Range: Up to 63 characters
Specifies the DNS server.
A maximum of three IPv4 addresses can be specified.
Default: 0.0.0.0
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
125