Epson AcuLaser C3900N Reference Manual page 149

IEEE802.1x
Item
IEEE802.1x
EAP Type
User ID
Password
TTLS Anonymous Name
TTLS Authentication Type
Server Certificate Check
Description
Select whether to enable or disable the IEEE802.1x function.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - IEEE802.1X - ENABLE
Select the type of authentication used with IEEE802.1x.
Choices: None, EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP, Server Specification
Default: None
Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS,
EAP-TTLS, PEAP, LEAP or Server Specification.
Range: Up to 128 characters
Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS,
PEAP, LEAP or Server Specification.
Range: Up to 128 characters
Specify the logon name used with EAP-TTLS primary authentication. Specifies the
TTLS anonymous name, when EAP Type is set to EAP-TTLS or Server
Specification.
Range: Up to 128 characters
Default: anonymous
Note:
If EAP Type is set to Server Specification while the actual authentication
method is EAP-MD5, type in the same name as the User ID.
Specify the EAP-TTLS phase 2 authentication procedure. Specifies the TTLS
anonymous type, when EAP Type is set to EAP-TTLS or Server Specification.
Choices: PAP, MS-CHAP, MS-CHAPv2
Default: MS-CHAPv2
Specify the items where the server certificate is verified. Specifies the server
certificate check, when EAP Type is set to EAP-TLS, EAP-TTLS or PEAP.
Choices: Validity, CA Chain, Server ID
Default: Validity
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
149