Epson AcuLaser C3900N Reference Manual page 60

2. From the print server (32 bits), map the client computer (64 bits) drive (for example, "C"),
specified as a shared drive in step 1, as a network drive (for example, "z").
Note:
This setting is available for only PS driver.
3. Install on the print server (32 bits) the driver for a 32-bit operating system.
4. Right-click the printer that was installed, and then click the appropriate menu command to
display printer properties.
5. Select the Sharing tab, and then select the Share this printer check box.
6. Click Additional Drivers.
The Additional Drivers dialog box appears.
7. Under Processor, select the x64 check box, and then click OK.
8. Specify the folder containing the driver for a 64-bit operating system.
A dialog box appears, requesting the location of the setup information file.
9. Click Browse, and then select the setup information file (ntprint.inf) on the client computer
mapped as a network drive.
Note:
This setting is available for only PS driver.
❏ Specify the file at the following path.
z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx
❏ In the path mentioned above, "z" indicates the mapped network drive. In addition, the
characters indicated by "_xxx" at the end may differ depending on the driver version.
❏ Depending on the client computer being used, the setup information file may be stored in a
different location. If there is a folder named "amd64" at the same level as "ntprint.inf", specify
the setup information file for a 64-bit operating system located within that folder. In addition,
if the driver for a 32-bit operating system is to be installed, specify the setup information file in
the folder named "i386" at the same level as "ntprint.inf".
10. Click Open.
The installation begins.
AcuLaser C3900 Reference Guide
Network Printing 60