Canon PowerShot SX50 HS User Manual page 50

Shooting (Smart Auto)
Movies
Microphone
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Once movie recording begins, a smaller image display area (field
of view) is shown, with the subject enlarged. This change is due
to rotational image stabilization. To shoot subjects at the same
size shown before shooting, adjust the image stabilization setting
(= 1 48).
• To correct suboptimal image color that may occur in [
shooting (= 7 7) after you recompose shots, press the movie
button to stop recording, and then press it again to resume
recording.
• Audio is recorded in stereo.
50
• Before shooting a movie, lower the
flash with your finger. Be careful not to
touch the microphone when shooting
a movie. Leaving the flash raised, or
blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound muffled.
] movie