Adjusting The Flash Output - Canon PowerShot SX50 HS User Manual

•
<D>: Manual
• Calculation of standard exposure is based on the specified metering method
(= 1 16).

Adjusting the Flash Output

Choose from the three flash levels in <D> mode.
• You can also set the flash level by accessing <n> (= 4 2) and
choosing [Flash Output] in [Flash Control] on the [4] tab.
• You can set the flash level in <M> or <B> mode by accessing <n>
(= 4 2), choosing [Flash Control] on the [4] tab, and then setting [Flash
Mode] to [Manual].
• You can also access the [Built-in Flash Settings] <n> screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the <h> button for at least one second.
- When the flash is up, press the <h> button and immediately press the
<n> button.
Specific Shutter Speeds and Aperture Values (<M> Mode)
1
Enter <D> mode.
z z Set the mode dial to <D>.
2
Configure the setting.
z z
Press the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <q><r> buttons or turning
the < 5 > dial (= 4 1).
Once the setting is complete, [X] is
X X
displayed.
Still Images
153