Checking Connection Information - Canon PowerShot SX50 HS User Manual

Using an Eye-Fi Card
• Choosing [
connection will be restored after you choose another shooting mode or enter
Playback mode, the camera may transfer any movies made in [
again.

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
•
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
246
] mode will interrupt the Eye-Fi connection. Although the Eye-Fi
z z Press the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
z z Choose [Connection info], and then press
the <m> button.
The connection information screen is
X X
displayed.
Choose [Disable] in [Eye-Fi trans.].
z z Press the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
z z Choose [Eye-Fi trans.], and then choose
[Disable].
] mode