Canon PowerShot SX50 HS User Manual page 167

Filtering Display by [ ], [ ], [ ; ], or [ ]
Still Images
1
Choose the first condition for
image display or navigation.
z z In single-image display (except detailed
information display), press the <o>
button, and then press the <o><p>
buttons to choose a display filter.
z z When [ ] is selected, you can view
only images matching this condition by
pressing the <q><r> buttons. To perform
an action for all of these images together,
press the <m> button and go to step 3.
2
Choose the second condition
and check the images found.
z z Press the <q><r> buttons to choose
another condition. Once you turn the
<5> dial, you can view the images
narrowed down by your conditions.
z z To cancel display filtering, press the
<n> button.
z z
To switch to filtered image display, press
the <m> button and go to step 3.
3
View the filtered images.
z z Images matching your conditions are
displayed in yellow frames. To view
only these images, press the <q><r>
buttons, or turn the <5> dial.
z z To exit filtered image display, press the
<o> button, and after [Image search
canceled] is displayed, press the <m>
button.
Browsing and Filtering Images
Movies
167