Canon PowerShot SX50 HS User Manual page 155

• Settings will not be saved if you press the shutter button halfway and
return to the shooting screen from the custom display settings screen.
•
Grayed-out items can also be specified, but they may not be
displayed in some shooting modes.
• Grid lines are not recorded in your shots.
Assigning Functions to the <
•
To restore default settings, choose [
• Icons labeled with [
current shooting mode or under current function conditions.
•
When the [ ] or [
white balance data (= 1 23), and the white balance settings change to [
• When the [%] function is used, each press of the <
locks the focus, and [%] is displayed on the screen.
• Pressing the <
screen and viewfinder display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
- Open and close the screen
- Raise and lower the flash
1
Access the setting screen.
z z
Press the <n> button, choose [Set
Shortcut button] on the [4] tab, and then
press the <m> button (= 4 2).
2
Configure the setting.
z z Press the <o><p><q><r> buttons or
turn the <5> dial to choose a function to
assign, and then press the <m> button.
3
Use the assigned function as needed.
z z Press the <
assigned function.
] indicate that the function is not available in the
] function is used, each press of the <
> button when the [
Customization for Shooting Styles
Still Images
> Button
> button to activate the
].
> button records
> button adjusts and
] function is used deactivates both
Movies
] or [ ].
155