Canon PowerShot SX50 HS User Manual page 225

Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC60 to prevent light outside the angle of view from
entering the lens.
• Vignetting may occur if you use the built-in flash when the lens
hood is attached.
• A lens hood and filter adapter cannot be attached to the camera at the same
time.
Still Images
Attach the hood.
z z Align the lens hood mark ( ) with the
camera mark ( ), and turn the lens hood
in the direction of the arrow until it locks
in place.
z z To remove the lens hood, turn it the
opposite direction.
z z To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark ( ) with the camera
mark ( ), and turn the lens hood in the
direction of the arrow until it locks in
place.
Using Optional Accessories
Movies
225