Canon PowerShot SX50 HS User Manual page 186

Image Categories
Choosing Images Individually
• Images will not be assigned to a category if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 4.
186
1
Choose [Select].
z z
Following step 2 on = 1 85, choose
[Select] and press the <m> button.
2
Choose an image.
z z Press the <q><r> buttons or turn the
<5> dial to choose an image.
3
Choose a category.
z z Press the <o><p> buttons to choose
a category and then press the <m>
button. [ ] is displayed.
z z To cancel selection, press the <m>
button again. [
z z Repeat this process to choose additional
images.
4
Finish the setup process.
z z Press the <n> button. A
confirmation message is displayed. Press
the <q><r> buttons or turn the <5>
dial to choose [OK], and then press the
<m> button.
] is no longer displayed.