Canon PowerShot SX50 HS User Manual page 238

Printing Images
Adding Images to the Print List (DPOF)
Batch printing (= 2 42) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
• RAW images cannot be included in print list.
Adding Images to the Print List via the <c> Button
You can add images to the print list (DPOF) after your shot or later during
playback simply by pressing the <c> button.
• Print list cannot be set up while the camera is connected to a printer.
238
1
Choose an image.
z z Press the <q><r> buttons or turn the
<5> dial to choose an image.
2
Add the image to the print list.
z z
Press the <c> button.
z z Press the <o><p> buttons to specify
the number of prints. Choose [Add] by
pressing the <q><r> buttons or turning
the <5> dial, and then press the <m>
button.
z z To remove the image from the print list,
repeat steps 1 – 2 but choose [Remove]
by pressing the <q><r> buttons or
turning the <5> dial, and then press the
<m> button.
Still Images
Still Images