Installation Task Summary; Factory-Set Defaults (Management Server) - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Installation Tasks
2

Installation Task Summary

Table 2-3
Task Number and Description
Task 1: Verify Installation Requirements
Task 2: Unpack, Inspect, and Install the Ethernet Hub
(Optional)
Task 3: Unpack, Inspect, and Install the Product
Task 4: Configure Product at the EFCM Basic Edition
Interface (Optional)
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
2-2
Table 2-2
server (running a SAN management application).
Table 2-2
Item
Liquid crystal display (LCD) front panel
Windows operating system user name (case sensitive)
Windows operating system password (case sensitive)
SAN management application user name (case sensitive)
SAN management application password (case sensitive)
LAN 1 (public interface)
LAN 2 (private interface)
Table 2-3
management server, and optional Ethernet hub. The table describes
each task, states if the task is optional, and lists the page reference.
Installation Task Summary
lists factory-set defaults for the rack-mount management

Factory-Set Defaults (Management Server)

summarizes installation tasks for the product, optional
Required or Optional
Required.
Perform task if hub is required to connect switch and
management interface.
Required.
Perform task if switch is managed through the EFCM
Basic Edition interface.
Default
9999
Administrator
password
Administrator
password
IP address 192.168.0.1
Subnet mask 255.0.0.0
Gateway address 0.0.0.0
IP address 10.1.1.1
Subnet mask 255.0.0.0
Gateway address 0.0.0.0
Page
2-4
2-5
2-8
2-11