Swap Ports Dialog Box - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

13. Reset the port:
a. At the Hardware View, right-click the port graphic. A pop-up
menu appears.
b. Select Reset Port. A message box displays, indicating a link
reset will occur.
c. Click OK. The port resets.
14. Inform the customer the test is complete and the device can be
reconnected and set online.
Swap Ports Failure of port circuitry behind an optical transceiver may require
swapping the logical port address of the failed port to a known
operational port. This ensures the port address matches information
in the hardware configuration definition (HCD) of an attached host.
NOTE: This procedure swaps hexadecimal logical port addresses, not
decimal port numbers.
To swap ports:
1. At the Element Manager application (management server), select
Swap Ports from the Maintenance menu. The Swap Ports dialog box
displays
Figure 4-15

Swap Ports Dialog Box

(Figure 4-15).
Repair Information
Repair Information
4-39