Event Codes Versus Maintenance Action - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Event Codes versus Maintenance Action (Continued)
Table 3-3
Event
Code Explanation
071 Switch is isolated.
072 E_Port connected to unsupported switch.
073 Fabric initialization error.
074 ILS frame delivery error threshold exceeded.
075 E_Port segmentation recovery.
080 Unauthorized worldwide name.
081 Invalid attachment.
082 Port fenced.
083 Port set to inactive state.
120 Error detected while processing system management command.
121 Zone set activation failed - zone set too large.
140 Congestion detected on an ISL.
141 Congestion relieved on an ISL.
142 Low BB_Credit detected on an ISL.
143 Low BB_Credit relieved on an ISL.
150 Fabric merge failure.
151 Fabric configuration failure.
200 Power supply AC voltage failure.
201 Power supply DC voltage failure.
203 Power supply AC voltage recovery.
204 Power supply DC voltage recovery.
206 Power supply removed.
207 Power supply installed.
Maintenence Analysis Procedures
Action
Go to MAP 0600.
Go to MAP 0600.
Go to Collect Maintenance Data. (EFCM Basic) or
Collect Maintenance Data (Element Manager).
Go to Collect Maintenance Data. (EFCM Basic) or
Collect Maintenance Data (Element Manager).
No action required.
Go to MAP 0500.
Go to MAP 0500
Go to MAP 0600.
Go to MAP 0500
Go to Collect Maintenance Data. (EFCM Basic) or
Collect Maintenance Data (Element Manager).
Reduce size of zone set and retry.
Go to MAP 0600.
No action required.
Go to MAP 0600.
No action required.
Go to MAP 0600.
Go to Collect Maintenance Data. (EFCM Basic) or
Collect Maintenance Data (Element Manager).
Go to MAP 0100.
Go to MAP 0100.
No action required.
No action required.
Replace FRU.
No action required.
Maintenance Analysis Procedures
3-3