c. At the SAN management application, select Setup from the
Discover menu. The Discover Setup dialog box displays
(Figure
Figure 4-21
Discover Setup Dialog Box
d. Select (highlight) the entry representing the reset switch in the
Available Addresses window and click Edit. The Address
Properties dialog box displays
Address Properties Dialog Box
Figure 4-22
e. Type 10.1.1.10 in the IP Address field and click OK. Entries at
the Discover Setup dialog box reflect the new IP address.
f. At the Discover Setup dialog box, click OK. Switch-to-
management server communication is restored and the
procedure is complete.
4-21).
(Figure
Repair Information
4-22).
Repair Information
4-49