Product Manager Overview
1
Using QuikSync
Enabling QuikSync
QuikSync Settings
McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
1-38
QuikSync is functioning to back up data when the QuikSync icon
displays in the system tray in the right corner of the Windows taskbar
(Figure
1-11). This icon spins when data is writing to the Zip disk.
QuikSync Icon in Windows System Tray
Figure 1-11
If an icon does not display, you must enable the application using the
procedure outlined in
1. Click the Windows Start button and select Programs, then Iomega
QuikSync and choose QuikSync.
The Iomega QuikSync dialog box displays.
Iomega QuikSync Dialog Box
Figure 1-12
2. Click On to enable QuikSync.
3. Click OK.
Do not change the default settings for automatic backup of the
EfcData directory. If you feel that QuikSync is not functioning
properly, check the settings using the following steps:
1. Open the QuikSync dialog box using one of these steps:
Enabling QuikSync
on page 1-38.