Task 8: Configure Management Server Information; Access The Management Server Desktop - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Installation Tasks
2

Task 8: Configure Management Server Information

Access the
Management
Server Desktop
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
2-38
3. Press ENTER and the default IP address of 192.168.0.1. appears.
4. Use the arrow keys as described in
address, then press ENTER. A Save Change? Yes, Save!! message
appears.
5. Press ENTER. The LAN 1 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Use the arrow keys as described in
mask, then press ENTER. A Save Change? Yes, Save!! message
appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 1 subnet mask changes.
8. Record the public LAN IP address and subnet mask for reference
if the server hard drive fails and must be restored.
Configure a server computer name and workgroup name from the
Windows operating system, using a LAN-attached PC with standard
web browser.
If required, change the server's gateway addresses and domain name
system (DNS) server IP addresses to conform to the customer's LAN
addressing scheme. The gateway addresses are the addresses of the
local router for the corporate intranet.
To login and access the server desktop:
1. Ensure the management server and a browser-capable PC are
connected through an Ethernet LAN. At the PC, launch the
browser application (Netscape Navigator or Internet Explorer).
2. At the PC, enter the LAN 2 IP address of the server, followed by
:5800, as the Internet uniform resource locator (URL). Use the
following format:
http://xxx.xxx.xxx.xxx:5800
step 2 to input a new IP
step 2 to input a new subnet