Table of Contents
Advertisement
Metronome
This unit has a built-in metronome.
The metronome works during the Recorder operation.
You can set it to work during both playback and recording or
only during recording.
1. When the Recorder is stopped, press the METRONOME
button to open the
METRONOME
2. Set the following items.
Use the CURSOR (5/b) buttons to select the desired item,
and then use the JOG/DATA dial to change its value.
MODE
You can select from the following modes.
Mode
OFF
Default, metronome OFF
Works both during recording and
REC&PLAY
playback
REC
Works only during recording
TEMPO
Set the speed.
The setting range is from
)
120
SIGNATURE
Set time signature to 4/4, 3/4, etc.
The setting range is from
)
4/4
BAR DISP
Set the
display to
BAR
LEVEL
Set the metronome volume.
The setting range is from
3. After making the settings, press the HOME button to return
to the Home screen.
The metronome works according to the
in step 2 above.
When the setting is enabled, the METRONOME button
flashes according to the metronome tempo.
The metronome signal is not recorded even if set to work
during recording.
11 - Various Other Functions
screen.
Description
to
(BPM). (Default:
20
250
to
. (Default:
1/1
12/8
. (Default:
)
ON/OFF
OFF
to
. (Default:
)
0
127
100
setting made
MODE
NOTE
• When the metronome is working, you can monitor the
sound of the metronome through connected external
speakers. Note, however, that the metronome sound might
also be recorded when you use a microphone to record.
• When the metronome is working, you can adjust the
item on the
LEVEL
METRONOME
items cannot be changed.
• You can use the metronome as a click track to help keep
time when recording rhythm guitar, bass, etc. at the
beginning of a song.
• If you want to use the metronome for practice, you can
either turn each track's fader all the way down during
playback or play a song that does not have any recordings.
setting screen, but other
61
TASCAM DP-24SD
Advertisement
Table of Contents
