NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual page 132

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To see details about a client, select its corresponding radio button in the Select column of the
Client table, and then click the Details button to display the Client Details screen (see
Figure 90 on page 132).
To close the Client Details screen, click CANCEL.
Figure 90.
Table 41 explains the fields of the Client Details screen.
Table 41. Network Client Details Information
Setting
MAC
Access Point
BSSID
SSID
Frequency
Auth
Client Type
Cipher
Description
The MAC address of the wireless client.
The name of the access point to which the wireless client is connected.
The MAC address of the access point's radio to which the wireless client is
connected.
The wireless network SSID that the wireless wireless client is using to connect to
the access point.
The channel frequency that the wireless client is using to connect to the access
point.
The security mode that the wireless client is using to connect to the access point
(Open, WEP, WPA, WPA2, or WPA/WPA2).
The wireless mode that the wireless client is using to connect to the access point
(802.11b/bg/ng or 802.11a/na).
The type of encryption that the wireless client is using.
Chapter 11: Monitoring the Wireless Network and Components | 132