Managing Certificates - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
4. Click Add to save your settings and add the new DHCP server to the DHCP Server List.
Table 11. DHCP Settings
Field
Use VLAN Interface
VLAN
IP Network
Subnet Mask
Default Gateway
Start IP
End IP
Use Default DNS Server
Primary DNS Server
Secondary DNS Server
Use Default WINS Server Select this check box to allow the DHCP server to use the wireless controller's
WINS Server

Managing Certificates

nternal authentication server for certificate-based authentication requires you to install a
The i
certificate on the wireless controller. There is a default self-signed server certificate installed
on the wireless controller. However, NETGEAR strongly recommends that you replace this
default certificate with a custom certificate issued for your site or domain by a trusted
certificate authority (CA).
To obtain a security certificate for the wireless controller, generate and submit a Certificate
Signing Request (CSR) to the CA of your choice. Upon receiving the CA-signed server
certificate, install the certificate from your PC as described in this section. Certificates must
be in X.509 PEM format.
Description
Select this check box to allow the DHCP server to function with multiple VLANs.
The DHCP server VLAN ID. The range is between 1 and 4094. The DHCP server will
service this VLAN.
The IP address for the wireless controller in the specified VLAN; when the Use VLAN
Interface check box is not selected, the wireless controller management IP/VLAN is
used.
The subnet mask that will be assigned to the wireless clients by the DHCP server.
The IP address of the default network gateway for all traffic beyond the local network.
The starting IP address of the range that can be assigned by the DHCP server.
The ending IP address of the range that can be assigned by the DHCP server.
Select this check box to allow the DHCP server to use the wireless controller's
default DNS servers. The Primary DNS Server and Secondary DNS Server fields
are masked out.
Enter the IP address of the primary DNS server for the network.
Enter the IP address of the secondary DNS server for the network.
default WINS server. The WINS Server field is masked out.
Enter the IP address of the WINS Server for the network.
Chapter 5: Configuring Network Settings | 60