The Simm And Hard Drive Options; Removing The Controller Card - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

The SIMM and Hard Drive Options

Optional SIMMs include:
v Dynamic random access memory (DRAM) SIMMs: 4MB, 8MB, 16MB, or
32MB
v Flash memory SIMMs: 2MB or 4MB
v Double Byte Character Set (DBCS) SIMMs: Chinese PCL (Simplified),
Chinese PCL (Traditional), and Japanese PostScript.
v Intelligent Printer Data Stream (IPDS) SIMM
To install any SIMM or the optional hard drive, you must remove the
controller card (see "Removing the Controller Card").

Removing the Controller Card

Use the following procedure to remove the controller card:
1. Switch off the printer.
Attention: Do not switch the power off if the printer is printing a page.
This action jams the printer.
2. Unplug the printer.
3. Remove the power cord from the back of the printer.
4. Loosen the thumbscrews located on the controller card at the back of the
printer. Remove the controller card.
166
Infoprint 32 and Infoprint 40: User's Guide