IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual page 247

User guide
Table of Contents

Advertisement

Action: Power the printer off, wait ten seconds, and power the printer
back on. If problems persist, call for technical support.
Note: When firmware errors occur, the printer might also print an
error page. If the printer does print an error page, save it so
you can tell technical support.
I/O INITIALIZING
Meaning: The network interface card is initializing.
Action: Normally none. If the message remains on the display and
nothing prints, and you have an Ethernet or token-ring card, make
sure your LAN cable is connected and the network interface card is
seated.
IPDS COAX
Meaning: The printer is receiving IPDS data through the coax
interface.
Action: None required.
IPDS ETHERNET
Meaning: The printer is receiving IPDS data through the Ethernet
interface.
Action: None required.
IPDS TOKEN-RING
Meaning: The printer is receiving IPDS data through the token-ring
interface.
Action: None required.
IPDS TWINAX
Meaning: The printer is receiving IPDS data through the twinax
interface.
Action: None required.
JOB QUEUED
Meaning: An informational page has been added to the print queue.
Action: None required.
KEY NOT VALID
Meaning: You pressed a key that is not valid.
Action: Press another key. In some instances, you may need to press
the Online key to use other keys such as the Menu key.
MENU LOCKED
Meaning: The system administrator has locked the menu. You can
view menu settings but you cannot change them.
Appendix C. Printer Messages
235

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infoprint 32Infoprint 40

Table of Contents