Table of Contents
Advertisement
821 PS OPTION / RESEAT PS SIMM
Meaning: Printer has detected a problem.
Action: Reinstall all SIMMs. See "Installing a SIMM" on page 167. If
the message recurs, call for service.
851 IPDS OPTION / RESEAT SIMM
Meaning: The printer has detected a problem with the IPDS SIMM.
Action: Reinstall the IPDS SIMM. See "Installing a SIMM" on page 167
for information about installing SIMMs. If the message recurs, call for
service.
852 IPDS OPTION / ADD MEMORY
Meaning: The printer requires more memory before it can process
IPDS jobs.
Action: Install more memory. See "Memory Requirements" on page 8
for information about IPDS memory requirements. See "Installing a
SIMM" on page 167 for information about installing memory SIMMs.
853 IPDS OPTION / POWER OFF/ON
Meaning: The printer does not have enough memory available to
process IPDS jobs.
Action: Switch the printer off, wait 20 seconds and then switch on the
printer power to clear the memory. If the error happens again, you
may need to install more memory. See "Memory Requirements" on
page 8 for information about IPDS memory requirements. See
"Installing a SIMM" on page 167 for information about installing
memory SIMMs.
854 IPDS DATABASE ERROR
Meaning: The printer cannot open the IPDS font data base, which is
stored in RAM, flash memory, or on the printer hard drive.
Action:
1. Power off the printer, wait 20 seconds, and then power on the
printer.
2. Select RESET IPDS FONTS from the Test Menu (see "Test Menu"
on page 92).
3. Power off the printer again, wait 20 seconds, and then power on
the printer.
If the error recurs, call for service.
861 HOST TIMEOUT / CHECK PRINTER
Meaning: The coax network interface card has sent an Intervention
Required message to the host. This error occurs when (a) the printer is
OFFLINE for longer than the HLD TMEOUT setting in the Coax
Appendix C. Printer Messages
261
Advertisement
Table of Contents
