IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual page 250

PJL TWINAX
PLEASE WAIT
POWER SAVER ON
PRINTER ERROR / POWER OFF
PS COAX
PS ETHERNET
PS PARALLEL
PS TOKEN-RING
PS TWINAX
238
Infoprint 32 and Infoprint 40: User's Guide
Meaning: The printer is receiving or sending PJL information through
the twinax port.
Action: None required.
Meaning: The printer is processing data and cannot immediately
respond to a request.
Action: Wait until the message clears. If the message remains and
processing on the host appears to have stopped, power off the printer,
wait ten seconds, and then power on the printer.
Meaning: The printer is in power-saving mode and has temporarily
shut off power to certain of its components. Power will be restored as
soon as a job is submitted.
Action: None required.
Meaning: An unexpected firmware error has occurred.
Action: Power off and then power on the printer. The printer should
print an error page. If the error persists, call for service.
Meaning: The printer is receiving PostScript data through the coax
interface.
Action: None required.
Meaning: The printer is receiving PostScript data through the
Ethernet interface.
Action: None required.
Meaning: The printer is receiving PostScript data through the parallel
interface.
Action: None required.
Meaning: The printer is receiving PostScript data through the
token-ring interface.
Action: None required.
Meaning: The printer is receiving PostScript data through the twinax
interface.