Table of Contents
Advertisement
Action: Remove jammed paper from areas D and E. See "Clearing
2000-Sheet Finisher Jams" on page 88.
362 FINISHER JAM / AREA E
Meaning: Paper has jammed in area E in the 2000-Sheet Finisher.
Action: Remove jammed paper from area E. See "Clearing 2000-Sheet
Finisher Jams" on page 88.
410 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher cannot eject output.
Action: Remove output from bins and switch the printer off, then on
again. If this does not correct the problem, call for service.
411 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher cannot align output stack.
Action: Remove output from bins and switch the printer off, then on
again. If this does not correct the problem, call for service.
412 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher cannot offset output stack.
Action: Remove output from bins and switch the printer off, then on
again. If this does not correct the problem, call for service.
413 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher cannot properly detect output trays.
Action: Remove output from bins and switch the printer off, then on
again. If this does not correct the problem, call for service.
414 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher elevator has reached upper limit of
travel.
Action: Switch the printer off, then on again. If this does not correct
the problem, call for service.
415 FINISHER / POWER OFF/ON
Meaning: 2000-Sheet Finisher elevator has reached lower limit of
travel.
Action: Switch the printer off, then on again. If this does not correct
the problem, call for service.
416 FINISHER / POWER OFF/ON
Meaning: Stapler mechanism is in incorrect position.
Action: Switch the printer off. Check to see the stapler head moves
freely, then power on the printer. If this does not correct the problem,
call for service.
Appendix C. Printer Messages
251
Advertisement
Table of Contents
