8. Close Cover H.
9. If you pressed the Pause button to suspend the 2000-Sheet Finisher
operation, press the Pause button again to resume printing. If you used
Cancel Print, resubmit your job.
Changing the Usage Kit
The usage kit typically needs to be changed every 300,000 prints, however, the
life of the usage kit depends on the type of paper you use and the type of
output you print. The customer is responsible to purchase and install the
usage kit.
The part numbers for replacement usage kits are:
v (100 volt): 90H3569
v (120 volt): 90H3567
v (230 volt): 90H3568
To change the usage kit, do the following:
1. Switch off the printer.
2. Unplug the printer.
3. Remove the power cord from the back of the printer.
CAUTION:
<2-25> High temperature; switch off the printer and allow at least 20 minutes
for parts in this area to cool before handling.
152
Infoprint 32 and Infoprint 40: User's Guide