Table of Contents
Advertisement
634 NVRAM ERROR / POWER OFF/ON
671 DISK ERROR / POWER OFF/ON
672 DISK ERROR / POWER OFF/ON
673 DISK ERROR / POWER OFF/ON
711 COVER OPEN / CLOSE DUPLEX
712 PAPER JAM / DUPLEX UNIT
713 PAPER JAM / DUPLEX UNIT
714 DUPLEX ERROR / CHECK CABLE
256
Infoprint 32 and Infoprint 40: User's Guide
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, reinstall all SIMMs. See "Installing a
SIMM" on page 167. If the message recurs, call for service.
Meaning: The printer has detected an error in the NVRAM
(EEPROM).
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, reinstall all SIMMs. See "Installing a
SIMM" on page 167. If the message recurs, call for service.
Meaning: The printer has detected a problem with the hard drive.
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, call for service.
Meaning: The printer has detected a problem with the hard drive.
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, call for service.
Meaning: The printer has detected a problem with the hard drive.
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, call for service.
Meaning: The duplex unit is open.
Action: Close the duplex unit tightly against the printer.
Meaning: Paper has jammed in the duplex unit.
Action: Switch the printer off, open the duplex unit, and remove the
jammed paper. Close the duplex unit and switch on the printer power.
If this does not correct the problem, call for service.
Meaning: Paper has jammed in the duplex unit.
Action: Switch the printer off, open the duplex unit, and remove the
jammed paper. Close the duplex unit and switch on the printer power.
If this does not correct the problem, call for service.
Meaning: The printer has detected a problem with the duplex unit.
Action: Power off the printer, check the cable connecting the duplex
unit to the printer, then switch on the printer power.
Advertisement
Table of Contents
