Table of Contents
Advertisement
Coaxial SCS Menu
Item
TRAY 1
TRAY 2
TRAY 3
TRAY 4
TRAY 5
AUX
ENV
128
Infoprint 32 and Infoprint 40: User's Guide
Value
COR*
C-PORT
PORT
LAND
Specifies the default orientation for jobs printed from each
tray.
v TRAY 1 is the upper 500-sheet input tray on the printer.
v TRAY 2 is the lower 500-sheet input tray on the printer.
v TRAY 3 is the 500-sheet tray in the 2500-Sheet Input Unit.
v TRAY 4 is the left 1000-sheet tray in the 2500-Sheet Input
Unit. It is below Tray 3.
v TRAY 5 is the right 1000-sheet tray in the 2500-Sheet
Input Unit. It is also below Tray 3.
v AUXTRAY is the 50-sheet tray on the left side of the
printer.
v ENV is the optional envelope feeder.
Each input can be assigned one of the following default
orientations:
v COR—computer output reduction: Printing in landscape
with the logical page reduced to fit more data on the
physical page. The printer reduces vertical spacing and
uses a smaller font with less space between letters.
v C-PORT—compressed portrait: printing in portrait, but
with horizontal and vertical compression.
Horizontal compression makes it possible to print 80
characters per line in portrait when 10 cpi is used and
133 characters per line when 16.7 cpi is used. The
horizontal compression factor differs depending on paper
size used. Because of this, no horizontal compression can
be seen when Letter paper is used because Letter paper
in portrait already allows 80 characters in 10 cpi.
Vertical compression makes it possible to print 66 lines
per page in 6 LPI or 88 lines per page in 8 LPI. The
vertical compression factor also varies depending on the
paper size used.
v PORT—portrait: the page has normal, upright business
letter orientation. For envelopes from the auxiliary tray,
PORT specifies normal envelope orientation.
v LAND—landscape: the page is wider than long.
Description
Advertisement
Table of Contents
