8. Slide the paper tray back into the printer until it clicks into place.
Loading Paper into the Auxiliary Tray
Note
Many applications allow you to specify the input tray you want to use.
This value will override any value set at the printer. If your application
does not let you pick an input tray, use the Paper Menu to select the
tray.
To select the auxiliary tray, set SOURCE to AUXTRAY (see "Selecting the
Default Input Tray" on page 64).
Use the following procedure to load paper into the auxiliary tray:
1. See "Selecting Paper and Other Printable Material" on page 34 for
information on media you can load. This illustration shows media loaded
Chapter 4. Paper Handling
45