Table of Contents
Advertisement
can fit into its memory. This can happen when the printer receives too
many soft fonts, macros, or complex graphics.
Action: If the AUTOCONTINU item in the Config Menu is set to ON,
printing resumes in ten seconds. Otherwise, press the Continue key.
Check the current page for errors. See "Memory Requirements" on
page 8 for information on how much memory various options require.
622 MEMORY ERROR / CHECK CONFIG
Meaning: The printer cannot allocate the memory required to print a
job.
Action: If the AUTOCONTINU item in the Config Menu is set to ON,
printing resumes in ten seconds. Otherwise, press the Continue key.
Check the current page for errors.
623 PRT OVERRUN / CHECK CONFIG
Meaning: A page is too complex to print at the current resolution.
Actions:
v If QUALITY is set to REFINE, change it to something else and
resubmit the job. Use your printer driver or the Config Menu. The
driver setting overrides the menu setting. See "Configuration
(Config) Menu" on page 102.
v If you are feeding paper long-edge first, change it to short-edge
first.
v Add more memory. See "Memory Requirements" on page 8 for
information on how much memory various options require.
630 NVRAM FAILED / POWER OFF/ON
Meaning: The printer has detected a memory error.
Action: Switch the printer off and reseat the controller card. Switch on
the printer power. If this does not correct the problem, call for service.
631 NVRAM FAILED / POWER OFF/ON
Meaning: The printer has detected a memory error.
Action: Switch the printer off and reseat the controller card. Switch on
the printer power. If the error recurs, call for service.
632 ROM ERROR / POWER OFF/ON
Meaning: The printer has detected an error in the ROM checksum.
Action: Switch the printer off, wait 20 seconds, then switch on the
printer power. If the error recurs, call for service.
633 DRAM ERROR / CHECK DRAM SIMM
Meaning: The printer has detected an error in the DRAM.
Appendix C. Printer Messages
255
Advertisement
Table of Contents
