Drive Chain; Inspecting The Drive Chain; Drive Chain Adjustment - HYOSUNG GV 250 EFI Owner's Manual

DRIVE CHAIN

The chain may require more frequent
adjustment that it is with periodic
maintenance depending upon your riding
conditions.
Check the chain every 1,000 km.
WARNING
Riding with the chain in poor condition
or improperly adjusted can lead to an
accident.
Inspect, adjust, and maintain the chain
properly before each ride, according to
this section.
◉ ◉ INSPECTING THE DRIVE CHAIN
When inspecting the chain, look for the
following :
● Loose pins
● Damaged rollers
● Dry or rusted links
● Missing O-ring seals
● Kinked or binding links
● Excessive wear
● Improper chain adjustment
If you find something wrong with the drive
chain condition or adjustment, correct the
problem if you know how. If necessary,
consult your authorized Hyosung dealer.
Damage to the drive chain means that the
sprockets may also be damaged. Inspect
the sprockets for the following :
Excessively worn teeth
●
● Broken or damaged teeth
● Loose sprocket mounting nuts
Good
If you find any of these problems with your
sprocket, consult your Hyosung dealer.
CAUTION
The two sprockets should be inspected
for wear when a new chain is installed
and replace them if necessary.
◉ ◉ DRIVE CHAIN ADJUSTMENT
Adjust the drive chain slack to the proper
specification. The chain may require more
frequent adjustments than periodic
maintenance schedule depending upon
your riding conditions.
Chain adjust in the following way.
�
�
48
Worn
�
�