Drive Chain - HYOSUNG Comet650 Owner's Manual

� � CLUTCH CABLE ADJUSTMENT
● A basis adjustment be allowed by the
clutch lever adjuster ③.
● Loosen the clutch lever adjuster ③.
● Screw the lock nut ② clockwise fully,
after finishing adjustment.
● After end of adjustment, tighten the lock
nut ② and cover the rubber boot ④.
● If not adjust by the adjuster ③, loosen
the clutch cable adjuster lock nut ⑥.
● Turn the clutch cable adjuster ⑤ in or
out to acquire the specified play.
● After end of adjustment, tighten the lock
nut ⑥.
● The clutch cable should be lubricated
with a light weight oil whenever it is
adjusted.
Clutch cable play ① ① 2 mm (0.08 in)
67

DRIVE CHAIN

The chain may require more frequent
adjustment that it is with periodic mainte-
nance depending upon your riding condi-
tions.
Check the chain every 1,000km.
WARNING
Riding with the chain in poor condition
or improperly adjusted can lead to an
accident.
Inspect, adjust, and maintain the chain
properly before each ride, according to
this section.
◉ ◉ Insepcting the Drive Chain
When inspecting the chain, look for the fol-
lowing:
● Loose pins
● Damaged rollers
● Dry or rusted links
● Missing X-O ring seals
● Kinked or binding links
● Excessive wear
● Improper chain adjustment
If you find something wrong with the drive
chain condition or adjustment, correct the
problem if you know how. If necessary, con-
sult your authorized Hyosung dealer.
Damage to the drive chain means that the
sprockets may also be damaged. Inspect
the sprockets for the following :
● Excessively worn teeth
Broken or damaged teeth
●
Loose sprocket mounting nuts
●