Rear Brake Adjustment; Brake Shoes Wear Limit - HYOSUNG GV 250 EFI Owner's Manual

◉ ◉ REAR BRAKE
●

Rear brake adjustment

WARNING
Too much clearance in the rear
brake pedal can cause poor braking
performance and may lead to an
accident. Too little clearance may
force brake shoes to rub against
the drum at all times, causing
damage to the shoes and the drum.
Follow the steps in this section to
adjust the rear brake pedal
properly.
Adjust the free travel ①
(0.79 ~ 1.18 in) by screwing in or out the
brake adjusting nut ② .
�
�
to 20 ~ 30 mm
53

Brake shoes wear limit

● ●
This motorcycle is equipped with the
brake shoes wear limit indicators on the rear
brakes.
To check wear of the brake shoes,
perform the following :
1. Check if the brake system is properly
adjusted.
2. While fully applying the brake, check to
see that the extension line of the index
mark is within the range on the brake
panel.
3. If the extension line is beyond the
range, have the brake shoes assembly
replaced by your Hyosung dealer to
ensure safe operation.
WARNING
Riding with worn brake shoes will
reduce braking performance and
will increase your chance of having
an accident.
Inspect brake shoes wear before
each use. Ask your Hyosung dealer
or qualified mechanic to replace
brake shoes if the shoes are worn
to the limit.