Drive Chain - HYOSUNG GT250 REi Owner's Manual

⊙ ⊙ CLUTCH CABLE PLAY
ADJUSTMENT
● A basis adjustment be allowed by the
clutch lever adjuster ③.
● Loosen the lock nut ② counter-
clockwise.
● Turn the clutch lever adjuster ③ in or out
to acquire the specified play.
● After end of adjustment, tighten the lock
nut ② clockwise fully and cover the
rubber boot ④.
● If not adjust by the clutch lever adjuster
③, adjust by the clutch cable adjuster ⑤.
● Loosen the clutch cable adjuster lock nut
⑥.
● Turn the clutch cable adjuster ⑤ in or
out to acquire the specified play.
● After end of adjustment, tighten the lock
nut ⑥.
● The clutch cable should be lubricated
with a light weight oil whenever it is
adjusted.
Clutch cable play ① ①
4 mm (0.16 in)
73

DRIVE CHAIN

The chain may require more frequent
adjustment that it is with periodic
maintenance depending upon your riding
conditions.
Check the chain every 1,000 km.
WARNING
Riding with the chain in poor condition
or improperly adjusted can lead to an
accident.
Inspect, adjust, and maintain the chain
properly before each ride, according to
this section.
⊙ ⊙ INSPECTING THE DRIVE CHAIN
When inspecting the chain, look for the
following :
● Loose pins
● Damaged rollers
● Dry or rusted links
● Missing O-ring seals
● Kinked or binding links
● Excessive wear
● Improper chain adjustment
If you find something wrong with the drive
chain condition or adjustment, correct the
problem if you know how.
If necessary, consult your authorized
Hyosung dealer.
Damage to the drive chain means that the
sprockets may also be damaged.
Inspect the sprockets for the following :
Excessively worn teeth
●
Broken or damaged teeth
●
Loose sprocket mounting nuts
●