Tire Tread Condition; Tire Replacement; Front Tire Replacement; Rear Axle Nut - HYOSUNG GV 250 EFI Owner's Manual

◉ ◉ TIRE TREAD CONDITION
Tire wear
indicator
Operating the motorcycle with excessively
worn tire will decrease riding stability and
can lead to loss of control.
Inspect storage of tire thread' s depth by
the 『tire wear indicator』 .
Replace the front and rear tires at once
when appear the 『tire wear indicator』 .
CAUTION
The standard tire on
is 110/90 - 16 59S for front, and
150/80 - 15M/C 70S for rear.
The use of a tire other than standard
may cause trouble.
It is highly recommended to use the
standard tire supplied by Hyosung.
◉ ◉ REAR AXLE NUT
Inspect the rear axle shaft and jointing nut
for loosening.
Tire wear
indicator mark
56
◉ ◉ TIRE REPLACEMENT
●

Front tire replacement

1. Remove the caliper from the front fork by
removing the mounting bolts ① .
�
CAUTION
Never squeeze the front brake lever
with the caliper removed. It is very
difficult to force the pads back into
the caliper assembly and brake fluid
leakage may result.
2. Loosen the front axle pinch bolt ② .
3. Loosen the front axle ③ .
�
4. Carefully position a jack or block under
engine and raise until the front wheel is
slightly off the ground.
�