Chapter 25 Configuring Igmp Snooping And Mvr; Understanding Igmp Snooping - Cisco IE-3000-8TC Software Configuration Manual

Software configuration guide

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

Configuring IGMP Snooping and MVR

This chapter describes how to configure Internet Group Management Protocol (IGMP) snooping on the

IE 3000 switch, including an application of local IGMP snooping, Multicast VLAN Registration (MVR).

It also includes procedures for controlling multicast group membership by using IGMP filtering and

procedures for configuring the IGMP throttling action.

For complete syntax and usage information for the commands used in this chapter, see the switch

command reference for this release and the "IP Multicast Routing Commands" section in the Cisco IOS

IP Command Reference, Volume 3 of 3:Multicast, Release 12.2 from the Cisco.com page under

Documentation > Cisco IOS Software > 12.2 Mainline > Command References.

This chapter consists of these sections:

You can either manage IP multicast group addresses through features such as IGMP snooping and MVR,

or you can use static IP addresses.

Layer 2 switches can use IGMP snooping to constrain the flooding of multicast traffic by dynamically

configuring Layer 2 interfaces so that multicast traffic is forwarded to only those interfaces associated

with IP multicast devices. As the name implies, IGMP snooping requires the LAN switch to snoop on

the IGMP transmissions between the host and the router and to keep track of multicast groups and

member ports. When the switch receives an IGMP report from a host for a particular multicast group,

Understanding IGMP Snooping, page 25-1

Configuring IGMP Snooping, page 25-6

Displaying IGMP Snooping Information, page 25-15

Understanding Multicast VLAN Registration, page 25-16

Configuring MVR, page 25-19

Displaying MVR Information, page 25-23

Configuring IGMP Filtering and Throttling, page 25-23

Displaying IGMP Filtering and Throttling Configuration, page 25-28

C H A P T E R

Cisco IE 3000 Switch Software Configuration Guide

Show Quick Links

Table of Contents

Troubleshooting