Management Options - Cisco IE-3000-8TC Software Configuration Manual

Features
•
•
•
•

Management Options

•
•
•
•
•
•
Cisco IE 3000 Switch Software Configuration Guide
1-4
Support for Cisco IOS IP Service Level Agreements (SLAs) responder that allows the system to
anticipate and respond to Cisco IOS IP SLAs request packets for monitoring network performance.
See the release notes for responder configuration.
Configurable small-frame arrival threshold to prevent storm control when small frames (64 bytes or
less) arrive on an interface at a specified rate (the threshold)
Flex Link Multicast Fast Convergence to reduce the multicast traffic convergence time after a Flex
Link failure
RADIUS server load balancing to allow access and authentication requests to be distributed evenly
across a server group.
An embedded device manager—The device manager is a GUI that is integrated in the software
image. You use it to configure and to monitor a single switch. For information about launching the
device manager, see the getting started guide. For more information about the device manager, see the
switch online help.
Network Assistant—Network Assistant is a network management application that can be
downloaded from Cisco.com. You use it to manage a single switch, a cluster of switches, or a
community of devices. For more information about Network Assistant, see Getting Started with
Cisco Network Assistant, available on Cisco.com.
CLI—The Cisco IOS software supports desktop- and multilayer-switching features. You can access
the CLI either by connecting your management station directly to the switch console port or by using
Telnet from a remote management station. For more information about the CLI, see
"Using the Command-Line Interface."
SNMP—SNMP management applications such as CiscoWorks2000 LAN Management Suite (LMS)
and HP OpenView. You can manage from an SNMP-compatible management station that is running
platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of
MIB extensions and four remote monitoring (RMON) groups. For more information about using
SNMP, see Chapter 33, "Configuring SNMP."
Cisco IOS Configuration Engine (previously known to as the Cisco IOS CNS
agent)-—Configuration service automates the deployment and management of network devices and
services. You can automate initial configurations and configuration updates by generating
switch-specific configuration changes, sending them to the switch, executing the configuration
change, and logging the results.
For more information about CNS, see
CIP—Common Industrial Protocol (CIP) is a peer-to-peer application protocol that provides
application level connections between the switch and industrial devices such as I/O controllers,
sensors, relays, and so forth.You can manage the switch using CIP-based management tools, such
as RSLogix. For more information about the CIP commands that the switch supports, see the
command reference.
Chapter 6, "Configuring Cisco IOS Configuration Engine."
Chapter 1 Overview
Chapter 2,
OL-13018-03