Examples; Setting Up The Domain - Cisco IE-3000-8TC Software Configuration Manual

Chapter 5 Configuring Cisco EnergyWise
Command
Step 6
energywise level 0 recurrence importance
importance at minute hour day_of_month month
day_of_week
Step 7 end
Step 8
show energywise recurrence
Step 9 copy running-config startup-config

Examples

•
•
•

Setting Up the Domain

Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30
Switch(config)# energywise importance 50
Switch(config)# energywise keywords lab1,devlab
Switch(config)# energywise name LabSwitch
Switch(config)# energywise neighbor TG3560G-21 43440
Switch(config)# energywise role role.labaccess
Switch(config)# end
Switch# show energywise domain
Name
Domain
Protocol
IP
Port
Switch# show energywise neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
Id
--
1
2
3
OL-13018-03
Setting Up the Domain, page 5-11
Manually Managing Power, page 5-12
Automatically Managing Power, page 5-12
: TG3560G-41
: cisco
: udp
: 2.2.2.21
: 43440
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Neighbor Name
-------------
TG3560G-21
TG3560G-31
TG3560G-22
Purpose
(Optional) Schedule the power-off recurrence.
• importance importance—Set the importance of the port in
the domain. The range is from 1 to 100. The default is 1.
• minute—The range is from 0 to 59. Use * for the wildcard.
• hour—The range is from 0 to 23. Use * for the wildcard.
• day_of_month—The range is from 1 to 31. Use * for the
wildcard.
• month—The range is from 1 (January) to 12 (December). Use
* for the wildcard.
• day_of_week—The range is from 0 (Sunday) to 6 (Saturday).
Use * for the wildcard.
The specified time is the local time based on the
Note
PoE-entity time zone.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
End with CNTL/Z.
Ip:Port
-------
2.2.2.21:43440
2.2.4.31:43440
2.2.2.22:43440
Cisco IE 3000 Switch Software Configuration Guide
Managing Single Entities
Prot Capability
---- ----------
udp S I
static S I
cdp S I
5-11