Powering The Poe Port; Configuring Poe-Port Attributes - Cisco IE-3000-8TC Software Configuration Manual

Managing Single Entities
Command
Step 10
show energywise
show energywise domain
Step 11 copy running-config startup-config

Powering the PoE Port

Beginning in privileged EXEC mode:
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3 energywise level 0
or
energywise level 10
Step 4 end
Step 5 show energywise domain
show energywise children
Step 6
copy running-config startup-config

Configuring PoE-Port Attributes

Beginning in privileged EXEC mode:
Command
Step 1 configure terminal
Step 2
interface interface-id
Step 3
energywise importance importance
Cisco IE 3000 Switch Software Configuration Guide
5-8
Purpose
Verify your entries.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the port or the range of ports to be configured, and enter
interface configuration mode.
(Optional) Manually power off the port, or
Manually power on the port.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
The power level that you set in Step 3 is the default power
Note
level when the switch restarts.
Purpose
Enter global configuration mode.
Specify the port or the range of ports to be configured, and enter
interface configuration mode.
(Optional) Set the importance of the port.
The range is from 1 to 100.
The default is 1.
Chapter 5 Configuring Cisco EnergyWise
OL-13018-03