Displaying Snmp Status - Cisco IE-3000-8TC Software Configuration Manual

Displaying SNMP Status

Displaying SNMP Status
To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command. You also can use the
other privileged EXEC commands in
the fields in the displays, see the Cisco IOS Configuration Fundamentals Command Reference, Release
12.2.
Table 33-6 Commands for Displaying SNMP Information
Feature
show snmp
show snmp engineID [local | remote]
show snmp group
show snmp pending
show snmp sessions
show snmp user
Cisco IE 3000 Switch Software Configuration Guide
33-18
Table 33-6
Default Setting
Displays SNMP statistics.
Displays information on the local SNMP engine and all remote engines that have
been configured on the device.
Displays information on each SNMP group on the network.
Displays information on pending SNMP requests.
Displays information on the current SNMP sessions.
Displays information on each SNMP user name in the SNMP users table.
to display SNMP information. For information about
Chapter 33 Configuring SNMP
OL-13018-03