Cdi Unit Inspection - DAELIM NS125III Service Manual

CDI Unit Inspection

CDI ignition circuit inspection
NOTE
Inspect the ignition system in proper sequence
based on the troubleshooting table.
- Remove the luggage box. (
- Remove the body cover. (
Remove the coupler from the CDI unit, and
check the ignition system circuits from the wiring
coupler side.
Inspection item
Pulse generator
Ignition coil (primary coil)
Main switch
Wire harness earth
Testing by CDI Tester
Check the CDI unit spark performance by using a
CDI tester.
Tool: CDI tester
NOTE
Read tester manual carefully prior to using the
tester.
Replace defective CDI unit.
4-5)
4-6)
Terminal
Blue/yellow and green
Black/yellow and earth
Black/white (+) and earth(-)
Green and earth
Standard value
90-150 20
0.1-0.2 20
No power connection when the main switch is ON
Power connected
CD unit
Ignition System
(68 )
(68 )
CDI tester
Adapter
16-3