Transmission/Crankshaft/Crank Case
Install a new gasket and dowel pin.
Tighten the transmission cover with setting bolts.
- Assemble the rear wheel (
- Assemble continuously variable transmission
(
section 8)
- Assemble the R. crank case cover (
Fill transmission oil.
Crank Case Disassembly
Remove the engine from the frame. (
Remove the R/L crank case cover.
Remove the transmission cover.
Remove the parts to disassemble crank case.
Loosen the seven R/L crank case setting bolts.
11-6
section 13)
section 8)
section 6)
Dowel pin
Bolt
Transmission cover
Bolt