DAELIM NS125III Service Manual page 136

Front Wheel/Front Fork/Steering
Align the wheel hub tangs with the slots of the
speedometer gear retainer, and assemble.
Tang
Slot
Apply grease to the dust seal rim.
Install the dust seal, and align the tangs of the
Retainer
speedometer gear retainer with the gear groove to
assemble the speedometer gear box.
Speedometer
Dust seal
gear box
Installation
Tang
Insert the front wheel between the front forks.
Insert the disc, taking precautions not to damage
the pad, and assemble the wheel.
Align the slots of the speedometer gear with the
tangs of the left fork slider.
Insert the front axle into the speedometer gear
box and the wheel hub.
Install the axle nut.
Assemble the speedometer cable, and tighten with
screws.
Axle nut
Place the front wheel on the ground, and tighten
the axle nut to the prescribed torque.
Torque value: 5.0-70kg-m(50.70N.m, 36-50ft-lb)
Speedometer
gear box
Speedometer cable
12-9