DAELIM NS125III Service Manual page 61

Fuel System
Float Level
Install the float valves, and float pins.
Check the float valve level.
Float level: 13mm
Assemble the float chamber.
Vacuum Chamber Assembly
Insert the jet needle and spring to the piston, and
install the holder.
NOTE
Match the diaphragm with the body notch.
Install the compression spring and vacuum
chamber.
Carburetor Installation
Assemble the air vent, fuel tubes, and drain tubes
to the carburetor.
Check the insulator O-ring for wear or damage,
and install the insulator.
5-8
Main jet
Float level gauge
Insulator
O-ring
Spring