Transmission - DAELIM NS125III Service Manual

Transmission

Loosen the drain bolt and remove the transmission oil.
Remove R. crank case cover. (
Remove the continuously variable transmission
( section 7)
Remove the rear wheel (
Loosen the 8 transmission cover bolts.
Remove the transmission cover.
Remove the gasket and dowel pin.
Remove the drive shaft from the transmission
cover by using a hydraulic press.
NOTE
Take precautions not to damage the cover joints.
Remove the oil seal of the drive shaft.
section 8)
section 13)
Transmission/Crankshaft/Crank Case
Transmission cover
Dowel pin
Transmission cover
Oil seal
Transmission
oil drain bolt
Drive shaft
11-3