DAELIM NS125III Service Manual page 49

External Parts
Handle Cover
Front Handle Cover
Loosen the 4 rear handle cover setting screws.
(1 each on R/L side, and 2 each on meter side)
Loosen 1 front handle cover setting screw.
Remove 1 R/L handle side cover lower screw,
and 1 each of the special upper side screws.
Pull the front handle cover forward, and remove
the wiring.
Remove the front handle cover.
Install in the reverse order of removal.
Rear Handle Cover
Loosen the 3 screws assembled to the handle bar.
Loosen the 3 screws assembled to the meter.
Remove the R/L side switch wiring.
Remove the rear handle cover.
Install in the reverse order of removal.
4-8
Rear view mirror
Screw
Screw
Front handle cover
Speedometer cable
Screw
Bolt
Handle side
cover
Meter
Rear handle
cover