DAELIM NS125III Service Manual page 140

Wrap the bottom case with a piece of cloth, and fix
it to the vise.
Apply screw locking agent to the socket bolt
thread, and assemble the socket bolt to the fork
piston.
Torque value: 2.0kg-m (20N.m, 14ft-lb)
NOTE
When a vise is used to hold the bottom case, do
not insert the case itself but insert the bracket.
Apply ATF to a new oil seal.
Assemble the oil seal to the bottom case.
Insert the oil seal with special tools until the
attachment groove of the bottom case set ring is
exposed.
Tools: Fork seal driver
Fork seal driver body
Install the set ring.
Accurately assemble the set ring to the bottom
case.
Install the dust seal.
Fill a prescribed amount of automatic transmission
fluid(ATF) into the fork tube.
Capacity: 80
Slowly press the fork tube 2-3 times to discharge
air.
Front Wheel/Front Fork/Steering
Fork oil
Socket bolt
Fork seal driver
Attachment
Set ring
Oil level
12-13