Target: Map1/Enetport1/Lanendpt1; Target: Map1/Enetport1/Lanendpt1/Ipendpt1; Enetport1 Properties; Lanedpt1 Properties - HP Integrity BL870c Operation Manual

Table 8-45 enetport1 Properties
Property Name
AutoSense
PermanentAddress
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
set Sets a property to a specific value.

Target: map1/enetport1/lanendpt1

The lanendpt1 target represents the iLO 2 LAN endpoint settings.
Table 8-46 shows lanendpt1 target properties.
Table 8-46 lanedpt1 Properties
Property Name
EnabledState Represents the iLO 2 MP LAN state.
MACAddress Represents the iLO 2 MP MAC address.
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.

Target: map1/enetport1/lanendpt1/ipendpt1

The ipendpt1 target represents the iLO 2 MP IP endpoint settings.
Table 8-47 shows ipendpt1 target properties.
Description
Specified if the iLO 2 AutoSense feature is
enabled. If it is disabled, iLO 2 network
speed is set to 10 mb/s.
Represents iLO 2 MP MAC address.
Description
SMASH Server Management Command Line Protocol
Access and Values
Read/write
Boolean values accepted.
Read-only
The iLO 2 MP MAC address is formatted
as twelve hexadecimal digits
(10203040506) with each pair representing
one of the six octets of the MAC address.
Access and Values
Read-only
The following are valid values:
Enabled, Disabled
Read-only
The MAC address is formatted as twelve
hexadecimal digits (010203040506), with each
pair representing one of the six octets of the
MAC address.
167